Power Components
Q104 MIDI Interface
Q105 Slew Limiter
Q106 Oscillator
Q107 Filter
Q108 Amplifier
Q109 Envelope Generator
Q110 Noise Source
Q111 Pan/Fade
Q112 4-Channel Mixer
Q113 8-Channel Mixer
Q115 Reverb
Q116 Ring Modulator
Q117 Sample & Hold
Q118 Instrument Interface
Q119 Sequencer
Q120 Connector Interface
Q121 Banana Jack Interface
Q122 Mini Jack Interface
Q123 Standards
Q124 Multiples
Q125 Signal Processor
Q127 Fixed Filter Bank
Q128 Switch
Q130 Clipper & Rectifier
Q131 Blank Panels
Q138 Logo Panel
Q140 Fixed Filter Bank Aid
Q141 Oscillator Aid
Q142 Pedal Interface
Q143 Presets
Q146 Normalization
Q147 Distributor
Q149 Signal Selector
Q150 Ladder Filter
Q161 Oscillator Mixer
Q162 Filter Mixer
Q171 Quantizer Bank
Q172 Quantizer Aid
Q960 Sequential Controller
Q961 Sequencer Interface
Q962 Sequential Switch
Q963 Trigger Bus
5-Octave Walnut Studio Keyboard
Keyboard to Module Power Cable
Foot Switch
Variable Foot Controller
PC Joystick Adapter
QKB15S 5-Octave Walnut Studio Keyboard
See the QKB15S web page for complete information.
Traditional 5-Octave Studio Keyboard controller. Beautiful walnut enclosure matches studio cabinets. Split keyboard and dual voice modes. Provides both analog (Pitch/Gate) and MIDI signals.
Powered by a wall transformer or from the QKP power cable (see below).
Dimensions
41"w x 9.5"d x 3.5"h
Price
$450.00 US.
QKP Keyboard to Module Power Cable
Use this cable to power the QKB15 keyboard controller directly from a Q101, Q103, or Q137 power module and eliminate the wall transformer.
6-pin male circular DIN plug on one end, and a 2.5mm DC power plug on the other. 36" long.
Price
$18.00 US.
QFCS Foot Switch
Provides on/off control of parameters in the synthesizer system.
Use to trigger envelopes and sequences,
for controlling portamento
or for simply activating additonal effects while playing.
Use in conjunction with the Q142 Pedal Interface Module.
Manufacturer will vary.
Price
$25.00 US.
QFCV Variable Foot Controller
Provides variable control of parameters.
Control filter sweep, tremolo
depth and virtually any other voltage control-able parameter.
Use in conjunction with the Q142 Pedal Interface Module.
Manufacturer will vary.
Price
$35.00 US.
QPCJA PC Joystick Adapter
Use the QPCJA Joystick adapter cable to control your synthesizer using a standard PC joystick.
The adapter cable breaks out the X axis, Y axis, switch #1, and switch #2
signals which can then be patched through a Q142 Pedal Interface Module
to create control voltages and gate signals.
Control filter sweeps, modulation depths, sequencer on/off, etc.
To capture all 4 signals you will need 2 Q142 modules.
Cables are 12" long.
User must provide an analog PC Joystick with 15 pin D-Sub connector.
Price
$35.00 US.
Questions? Copyright (c) Synthesizers.com