Most recent first:
Q172 - Quantizer Bank Aid
Q171 - Quantizer Bank
SynthInvent V1.5 - Synthesizer System Layout Software
SynthInvent V0.9 - Synthesizer System Layout Software
Q960 - Moog 960 Sequential Controller Clone
Q962 - Moog 962 Sequential Switch Clone. Provides manual or trigger-controlled
selection of signals. Used to convert the Q960 sequencer into a 24-stage sequencer.
Q961 - Moog 961 Interface Clone. Provides mixing of Triggers with On-Time adjustment.
Q963 - Trigger Bus. Allows real-time switching of triggers from a Q960 Sequencer.
Entry System Purchase Plan
A way to get your modular system going with minimal impact to the pocketbook.
DIY Cabinet Plans
Build a modular cabinet for about $40.
Q149 Signal Selector
Manually select one of three signals. Two combinable sections.
Sorry, I don't provide product introduction schedules.
Voltage Controlled Envelope Generator
Similar to the Q109 Envelope Generator but allows real-time
voltage control of each parameter. Initial delay under voltage and manual control.
Waveform shape controls.
Delays gate signals by various amounts under manual or voltage control.
Various modified gate outputs provide shifting, delaying, extending, fixed-on-time, etc.
Locks control voltages into 1/12 volt (note) and other standard intervals.
Eases sequencer programming.
Accessory module for sequencers that counts cycles and provides variable voltage and gate outputs.
Used to create complex sequencing patterns in a musical and intuitive way.
An interesting combination of LFO, EG, VCA, Mixer.
Makes it easy to create complex envelopes containing decaying/growing LFO signals, along
with control from external velocity signals
Easily and intuitively creates vibrato and tremelo for VCAs and VCOs.
The LFO and EG sections can be used separately if desired.
Q119 Sequencer Aid
Used in conjuction to the Q119 Sequential Controller to bring out
individual gate signals.
A/B bus switch for each signal.
Frequency Divider, Multiplier
Takes input from an oscillator and creates lower and higher frequencies.
Variable Curve Converter
Converts an input to various non-linear curves under voltage control.
Provides unique modification of envelopes, interesting filtering effects for audio signals, and strange non-linear scaling of control voltages.
Provides convenient functions to send a signal to external sources.
L/R Panning, limiter, clipping LED, Master output on/off, Headphone amplifier (Mono/Stereo).
Universal Logic Function
Digital and analog gates, comparators, counters, 1-shots, shift-registers, etc.
Used to create bizarre patterns with sequencers or gate timings.
Can manipulate audio and control signals is ways limited by your own imagination.
Quad width module with a speaker and amp circuit.
Bank of 3 State Variable filters.
Dual State Variable filters can be put in series or parallel.
Separate frequency controls, spacing, and resonance.
X/Y grid of inputs and outputs with attenuation for each.
Creates phase modulation, pulse position modulator, panning between
waveforms, clamping, etc.
Synth Voice Module
Complete, minimal synth with 2 VCO, VCF, VCA, LFO, RING, NOISE, EG.
8 spaces wide.
Pitch bend wheel and wheel controller
Manual control wheels used to control any module's parameter.
Wood cabinet similar to the KB15 keyboard with 2 wheels. One wheel will
automatically return to center and can be used as a pitch bend.
Both wheels have adjustable output voltage ranges.
Manual Controller Module
Module has many controls including push buttons, toggle switches, and potentiometers
that can be used to manually control other modules easily.
Use your fingers to create pitch voltages and gates.
Balanced Input Interface
Converts a balanced input into a single-ended signal for use
in the rest of the system.
Like that used in guitar effect boxes.
Digital module providing a number of familiar time-delay functions.
Voltage control for everything.
Drum trigger Interface Module
Accepts drum trigger signals from popular pads and sensors to create
Gate signals which can trigger sounds.
Adjustable thresholds and gate widths.
DIY Breadboard Module
Quad width module that has several pots, jacks, switches, and LEDs
along with a breadboard and power supply connections.
Allows Synth-DIY-Guru's to actually wire up a circuit on the fly
and share ideas with others.
19" Rack Adapter
Fits in a synthesizer cabinet and allows you to mount a standard
19" rack product such as an effect processor, etc.
Would Consume at least 9 module widths.
Rack product depth would be limited to cabinet depth.
Maximum rack product height would be 7"
Copyright (c) Synthesizers.com